Menu

Vigitek

  • 203.829.5756
  • [javascript protected email address]
Home Diode driving CW diode drivers LDD-1500 laser diode driver

LDD-1500 laser diode driver

  • Laser diode driving

Features

  • Up to 1500 W output power (2 kW on request)
  • Up to 100 A output current
  • Wide range of input voltages
  • 0.98 power factor correction (PFC) value
  • Low EMI and leakage current

Description

LDD-1500 is a series of high-power laser diode drivers. It was designed to provide current by pulses or in continuous form to laser diodes, laser diode bars and stacks.

Several variants of LDD-1500 are offered with different maximum output power (Pmax could be 600, 1000 or 1500 W), maximum output current (Imax range is 10 … 100 A), maximum output voltage (Vmax ≤ Pmax/ Imax), selected at the moment of order. For more detailed information see user manual.

Devices are encased and easy for the user to mount, they run on common 100‑240 V AC or 200‑240 V AC 50/60 Hz, so you don’t need any extra power supply for the driver.

An output current level can be programmed in working range by user applying a DC voltage to the respective pin. An operating frequency and pulse width are set by an external low voltage TTL signal from pulse generator. Base interface to control LDD is analogue (15 Pin “D”-Sub Female).

It is also possible to control the module through an additional external PCBs (should be purchased separately), either stand-alone (ordering code – STA) with jumpers and trimpot or driven by a computer through RS‑232 interface (ordering code – RS232).

Diode drivers were designed to comply with IEC 60601-1 (safety) and IEC 60601-1-2 (EMC). Therefore, modules may be used in different kinds of medical devices without any additional filtration and safety measures, at the same time for the proven compliance to standards for a certain modification the certification procedure is need to be passed, which is available on demand.

Technical Specifications

Input:

Voltage
200-240 V AC, 50/60 Hz
or 100-240 V AC, 50/60 Hz
Current
< 12 A

Output:

Maximum power ( P max )
600, 1000 or 1500 W (2000 W are available on request)
Maximum current ( I max )
selectable in range 10 … 100 A
Maximum voltage ( V max )
should be less than P max / I max
Rise / fall time
< 1 ms (10% to 90% full current),
< 500 μs on request
Current regulation accuracy
< 1% of I max
Current value error
< 1% of I max
Current overshoot
< 1% of I max
Efficiency
> 80%

Safety:

PFC value
> 0.98 (active)
Leakage current
< 150 μA
Safety approval (on request)
IEC60950, IEC60601-1
Case fault voltage
4000 VAC
EMC approval (on request)
IEC 60601-1-2 or EN 55011/CISPR 11

Interface:

Connector
15 Pin “D”-Sub Female
Current program
analog, 0-10V
Current monitor
analog, 0-10V
Voltage monitor
analog, 0-10V

Environment:

Operating temperature
0 … +40 °C
Storage temperature
-20 … +60 °C
Humidity
0 … 90%, non-condensing

Other:

Size (LxWxH)
296x213x70 mm
Weight
2.9 kg

Options

We offer these diode drivers in several modifications with different maximum output currents and voltages.

First of all maximum output power should be chosen (600, 1000 or 1500 W). Then maximum output current should be selected in range of 10 … 100 A. Maximal output voltage should be chosen less than Pmax / Imax.

Downloads

ldd-manual-en
ldd-manual-en-3.pdf (771 KB)