Menu

Vigitek

  • 203.829.5756
  • [javascript protected email address]
Home Flashlamp driving

  • NBU-1012 Discharge Circuit

    Rated 0 out of 5

    NBU-1012 is a general-purpose discharge circuit. It forms on the flashlamp quasi-rectangular pulses with the characteristics as below:

    • Flashlamp voltage – up to 1000 V
    • Flashlamp current – up to 1000 A
    • Pulse width – from 50 µsec to 100 msec
    Read more

  • SBZ-2008 Simmer Board

    Rated 0 out of 5

    SBZ-2008 is the general-purpose and most popular 24 VDC simmer supply. The main parameters are as follows:

    • Input – 24 VDC
    • Max. output voltage – 200 V
    • Output current – 300-800 mA (regulated with trimpot)
    • Max. output power – 70 W

    Features

    • Flashlamps’ ignition, improvement of their operational lifetime and stability
    • Cost-effective solution
    Read more

  • SBZ-3008 Simmer Module

    Rated 0 out of 5

    SBZ-3008 is a high-power modification of SBZ-2008 simmer supply. Model is forced air-cooled and suitable for dual-flashlamp operations. The main parameters are as follows:

    • Input – 24 VDC
    • Max. output voltage – 300 V
    • Output current – 300-800 mA (factory preset)
    • Max. output power – 100 W

    Features

    • Flashlamps’ ignition, improvement of their operational lifetime and stability
    • High-power solution, capable of driving up to two flashlamps connected in series
    Read more

  • SCA-2008 Simmer Board

    Rated 0 out of 5

    SCA-2008 is the general-purpose and most popular AC simmer supply. The main parameters are as follows:

    • Input – 230 VAC
    • Max. output voltage – 200 V
    • Output current – 300-800 mA (regulated with trimpot)
    • Max. output power – 70 W

    Features:

    • Flashlamps’ ignition, improvement of their operational lifetime and stability
    • Cost-effective solution
    Read more

  • SCA-3008 Simmer Module

    Rated 0 out of 5

    SCA-3008 is a high-power modification of SCA-2008 simmer supply. Model is forced air-cooled and suitable for dual-flashlamp operations. Main parameters are as follows:

    • Input – 230 VAC
    • Max. output voltage – 300 V
    • Output current – 300-800 mA (factory preset)
    • Max. output power – 100 W

    Features

    • Flashlamps’ ignition, improvement of their operational lifetime and stability
    • High-power solution, capable of driving up to two flashlamps connected in series
    Read more